Retaining pins

This topic contains 3 replies, has 2 voices, and was last updated by  Raw Plant Services June 5, 2018 at 3:51 pm.

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #3306

    Tom Skills
    Participant

    How much is a retaining pin for my 5 Tonne excavator?

    #3329

    Can you send some information regarding the brand and model of the hammer please. Or if you don’t know a picture and the chisel diameter would be great.

    #3330

    Tom Skills
    Participant

    Its a prodem

    #3331

    Hi thanks for the info…

    There’s an ID plate on the left hand side of the hammer that should give you the model number. If that’s missing then we would need the chisel diameter.

Viewing 4 posts - 1 through 4 (of 4 total)

You must be logged in to reply to this topic.