Hydraulic breaker spare parts

RAW Plant stock and provide spare parts for the Epiroc hydraulic breakers. Raw Plant is the UKs (and our international partners) premier supplier of Epiroc spare Parts. We stock the following:

Epiroc breaker Retainer Pins

Rawplant.co.uk are the UK’s number one supplier and stockist of Epiroc retainer pins. We stock retainer pins spare parts for all of the popular and most well known hydraulic breaker brands.

Epiroc breaker retaining pins are subject to wear. Depending on the material and where you are using the Epiroc breaker will determine how often they need to be serviced or replaced.

The retaining system of your Epiroc hydraulic breaker including the buffer ring, bushings should all be inspected during a tool change.

If you need replacement Epiroc breaker retainer pins – Rawplant.co.uk have you covered.

Epiroc breaker seals | seal kits

We also stock and supply a large variety of hydraulic breaker seal kits.

We have seal kits to fit almost any model of Epiroc breaker. Our Epiroc hydraulic breaker seal kits are made from the highest quality materials and are available for all the models of your Epiroc breakers including (but not limited to):

  • SB 52
  • SB 102
  • SB 152
  • SB 202
  • SB 302 / SB 302 T
  • SB 452 / SB 452 T
  • SB 552
  • SB 702
  • SB 1102
  • All MB Models
  • All HB Models
hydraulic breaker bushings

Epiroc Hydraulic breaker Bushings | Bushes

When it comes to routine maintenance often lubrication gets over looked (it’s an easy mistake to make).

This happens all to often and as a result, Rawplant.co.uk gets lots of enquiries regarding Epiroc seal kits.

Lubrication is often overlooked and as a result there is metal-to-metal contact between the hydraulic breakers tool and bushing which causes the bushings to wear out.

The great news is, we have lower, upper, tool seats, combo bushings kept in stock at all times.

If you’re looking for a hydraulic breaker seal kit – you’ve come to the right place!

Epiroc Hydraulic breaker Membranes & Diaphragms

Thousands of diaphragms and membranes kept in stock for next day delivery.

Epiroc Hydraulic Breaker
Pistons

We stock a range of pistons for lots of Epiroc breakers ranging from 1 ton to 100 tons.

hydraulic breaker tie rods

Epiroc Hydraulic Breaker
Tie Rods

We carry a large stock pile of hydraulic breaker tie rods. We have hundreds of tie rods in stock that fit many different breakers of all sizes and brands.

We have become a leading supplier of Epiroc spare parts throughout the United Kingdom (and abroad). We have lots of Epiroc parts in stock and will more than likely carry the part that your breaker needs! Our Epiroc parts are extremely competitively priced! We also provide what we believe is the very best in after sales service and support.

We have extensive knowledge of hydraulic breakers. We can offer you expertise and advice and in many cases help you choose and identify the correct Epiroc spare part for your breaker. You can call us on: 44 (0)121 445 6526 or by filling in the form below. We will be happy to help and assist you in any way we can!

RAW Plant – Any part for any hydraulic breaker!

Chisel part selector guide

Correct selection of hydraulic breaker spare parts helps in obtaining the maximum life span of your hydraulic breaker.


Conical Point - for general demolition work where penetrative breaking is required.

Wide Chisels - for increased productivity in softer materials.

Tarmac Cutters - as Wide Chisels but with 90 degree orientation for cutting/trenching.

Pyramid Points - for use where increased breakout forces are required

Royal Guard - for driving in rail guards.

X Type Point - for use in soft or high dust operations.

Blunts - for impact breaking, eg. secondary breaking and also scaling in mines and tunnels, etc.

Power Point - tool with hard core for use in very hard and abrasive conditions.
Upset Blunt - Blunt with increased diameter at working end to give increased life and wear resistance.
Chisels - as for Points but also where a cutting action is required, eg. trenching and benching

Note: Chisels give higher wear rates and stress levels in the retainer flat areas of the tool.
Rammer Stems & Pads - for compacting loose ground.
Grooved Chisel - for use in soft or high dust operations.
Driving Tool - for driving in posts, pipes etc
[]
1 Step 1
keyboard_arrow_leftPrevious
Nextkeyboard_arrow_right
FormCraft - WordPress form builder

Due to our expertise we offer our services for the following breakers.

PLUS many more.