Hydraulic Breaker Parts | Rock Breaker Parts
RAW Plant stock and provide parts for the most popular hydraulic breakers. Raw Plant is the UKs (and our international partners) premier supplier of Hydraulic breaker Parts. We stock the following:
Hydraulic Breaker Retainer Pins
Rawplant.co.uk are the UK’s number one supplier and stockist of hydraulic breaker retainer pins. We stock retainer pins parts for all of the popular and most well known hydraulic breaker brands.
Hydraulic breaker retaining pins are subject to wear. Depending on the material and where you are using the hydraulic breaker will determine how often they need to be serviced or replaced.
The retaining system of your hydraulic breaker including the buffer ring, bushings should all be inspected during a tool change.
If you need replacement hydraulic breaker retainer pins – Rawplant.co.uk have you covered. We also stock rock breaker retainer pins.
Hydraulic Breaker Seals | Seal Kits
We also stock and supply a large variety of hydraulic breaker seal kits and rock breaker seal kits.
We have seal kits to fit almost any brand of breaker. Our hydraulic breaker seal kits are made from the highest quality materials and are available for all the major hydraulic hammer manufacturers including (but not limited to):
- Atlas Copco
- Plus much more – get in touch today
Hydraulic Breaker Bushings | Bushes
When it comes to routine maintenance often lubrication gets over looked (it’s an easy mistake to make).
This happens all to often and as a result, Rawplant.co.uk gets lots of enquiries regarding hydraulic breaker seal kits.
Lubrication is often overlooked and as a result there is metal-to-metal contact between the hydraulic breakers tool and bushing which causes the bushings to wear out.
The great news is, we have lower, upper, tool seats, combo bushings kept in stock at all times.
If you’re looking for a hydraulic breaker bush kit or a rock breaker bush kit – you’ve come to the right place!
Hydraulic Breaker Membranes & Diaphragms
Thousands of diaphragms and membranes kept in stock for next day delivery. Our diaphragms and membranes are also suitable for rock breakers.
We stock a range of pistons for lots of breakers ranging from 1 ton to 100 tons.
Hydraulic Breaker Tie Rods
We carry a large stock pile of hydraulic breaker tie rods. We have hundreds of tie rods in stock that fit many different breakers of all sizes and brands.
We have hydraulic breaker parts (and rock breaker parts) to suit Montabert, Rammer, Sandvik, Indeco, Krupp, Atlas Copco, MSB, NPK, Hanwoo, Ammann, Arrowhead, Prodem and all other popular makes of hydraulic rock breakers. We are constantly asked for Points and chisels for Mounted hydraulic Breakers and mounted rock breakers. We have access to a number of makers, guaranteeing we meet and exceed our customers needs.
We have become a leading supplier of hydraulic breaker parts (and rock breaker parts) throughout the United Kingdom (and abroad). We have lots of hydraulic breaker parts in stock and will more than likely carry the part that your breaker needs! Our hydraulic breaker parts (and rock breaker parts) are extremely competitively priced! We also provide what we believe is the very best in after sales service and support.
We have extensive knowledge of hydraulic and rock breakers. We can offer you expertise and advice and in many cases help you choose and identify the correct hydraulic breaker part for your breaker. You can call us on: 44 (0)121 445 6526 or by filling in the form below. We will be happy to help and assist you in any way we can!
RAW Plant – Any part for any hydraulic breaker or rock breaker!
Chisel Part Selector Guide
Conical Point - for general demolition work where penetrative breaking is required.
Wide Chisels - for increased productivity in softer materials.
Tarmac Cutters - as Wide Chisels but with 90 degree orientation for cutting/trenching.
Pyramid Points - for use where increased breakout forces are required
Royal Guard - for driving in rail guards.
X Type Point - for use in soft or high dust operations.
Blunts - for impact breaking, eg. secondary breaking and also scaling in mines and tunnels, etc.
Power Point - tool with hard core for use in very hard and abrasive conditions.
Upset Blunt - Blunt with increased diameter at working end to give increased life and wear resistance.
Chisels - as for Points but also where a cutting action is required, eg. trenching and benching
Note: Chisels give higher wear rates and stress levels in the retainer flat areas of the tool.
Rammer Stems & Pads - for compacting loose ground.
Grooved Chisel - for use in soft or high dust operations.
Driving Tool - for driving in posts, pipes etc
What Our Customers Say...
Find out what the industry thinks about RAW PLANT Services and Breakers
Wonderful service all round. Excellent repair options, great value for money and excellent customer service.
We use RAW Plant to purchase our hydraulic breakers and for all of our repairs and servicing. Grade A service!
Raw Plant Services re-gas and service all of our hydraulic breakers. Competitively priced and extremely helpful.
DSM Demolition ltd
Can reach into places others Post Knockers can't. Unbeatable!
lightweight and versatile - we love Raw Plants attachments and use them on our fleet of diggers.
Plant Hire Now
Our lads love the Raw Plant kit!
Magnet Building Services
Helpful staff, professional service, specialist knowledge and helped us save thousands. Great company to work with!
Wye Valley Group
Thank you for all your good hard work in repairing, re-gassing and reconditioning our hydraulic breaker. We will be back!
Mcauliffe Civil Engineering ltd
We are very pleased with our new hydraulic breaker and the way Bob and Paul conducts their business. It has been a great experience working with them.