Hydraulic breaker spare parts

RAW Plant stock and provide spare parts for the most popular hydraulic breakers. Raw Plant is the UKs (and our international partners) premier supplier of Hydraulic breaker spare Parts. We stock the following:

Hydraulic breaker Retainer Pins

Rawplant.co.uk are the UK’s number one supplier and stockist of hydraulic breaker retainer pins. We stock retainer pins spare parts for all of the popular and most well known hydraulic breaker brands.

Hydraulic breaker retaining pins are subject to wear. Depending on the material and where you are using the hydraulic breaker will determine how often they need to be serviced or replaced.

The retaining system of your hydraulic breaker including the buffer ring, bushings should all be inspected during a tool change.

If you need replacement hydraulic breaker retainer pins – Rawplant.co.uk have you covered.

Hydraulic breaker seals | seal kits

We also stock and supply a large variety of hydraulic breaker seal kits.

We have seal kits to fit almost any brand of breaker. Our hydraulic breaker seal kits are made from the highest quality materials and are available for all the major hydraulic hammer manufacturers including (but not limited to):

  • Atlas Copco
  • Montabert
  • Furukawa
  • Rammer
  • NPK
  • Soosan
  • Plus much more – get in touch today
hydraulic breaker bushings

Hydraulic breaker Bushings | Bushes

When it comes to routine maintenance often lubrication gets over looked (it’s an easy mistake to make).

This happens all to often and as a result, Rawplant.co.uk gets lots of enquiries regarding hydraulic breaker seal kits.

Lubrication is often overlooked and as a result there is metal-to-metal contact between the hydraulic breakers tool and bushing which causes the bushings to wear out.

The great news is, we have lower, upper, tool seats, combo bushings kept in stock at all times.

If you’re looking for a hydraulic breaker seal kit – you’ve come to the right place!

Hydraulic breaker Membranes & Diaphragms

Thousands of diaphragms and membranes kept in stock for next day delivery.

Hydraulic Breaker

We stock a range of pistons for lots of breakers ranging from 1 ton to 100 tons.

hydraulic breaker tie rods

Hydraulic Breaker
Tie Rods

We carry a large stock pile of hydraulic breaker tie rods. We have hundreds of tie rods in stock that fit many different breakers of all sizes and brands.

We have hydraulic breaker spare parts to suit Montabert, Rammer, Sandvik, Indeco, Krupp, Atlas Copco, MSB, NPK, Hanwoo, Ammann, Arrowhead, Prodem, Epiroc, Furukawa, Caterpillar, Takeuchi, Volvo, Soosa, JCB and all other popular makes of hydraulic breakers. We are constantly asked for Points and chisels for Mounted hydraulic Breakers. We have access to a number of makers, guaranteeing we meet and exceed our customers needs.

We have become a leading supplier of hydraulic breaker spare parts throughout the United Kingdom (and abroad). We have lots of hydraulic breaker spare parts in stock and will more than likely carry the part that your breaker needs! Our hydraulic breaker spare parts are extremely competitively priced! We also provide what we believe is the very best in after sales service and support.

We have extensive knowledge of hydraulic breakers. We can offer you expertise and advice and in many cases help you choose and identify the correct hydraulic breaker spare part for your breaker. You can call us on: 44 (0)121 445 6526 or by filling in the form below. We will be happy to help and assist you in any way we can!

RAW Plant – Any part for any hydraulic breaker!

Chisel part selector guide

Correct selection of hydraulic breaker spare parts helps in obtaining the maximum life span of your hydraulic breaker.

Conical Point - for general demolition work where penetrative breaking is required.

Wide Chisels - for increased productivity in softer materials.

Tarmac Cutters - as Wide Chisels but with 90 degree orientation for cutting/trenching.

Pyramid Points - for use where increased breakout forces are required

Royal Guard - for driving in rail guards.

X Type Point - for use in soft or high dust operations.

Blunts - for impact breaking, eg. secondary breaking and also scaling in mines and tunnels, etc.

Power Point - tool with hard core for use in very hard and abrasive conditions.
Upset Blunt - Blunt with increased diameter at working end to give increased life and wear resistance.
Chisels - as for Points but also where a cutting action is required, eg. trenching and benching

Note: Chisels give higher wear rates and stress levels in the retainer flat areas of the tool.
Rammer Stems & Pads - for compacting loose ground.
Grooved Chisel - for use in soft or high dust operations.
Driving Tool - for driving in posts, pipes etc
1 Step 1
FormCraft - WordPress form builder

Due to our expertise we offer our services for the following breakers.

PLUS many more.