Forum Replies Created
-
Posts
-
Yes we have a RAW200 Post Knocker in stock and ready to go, we will need to manufacturer the head bracket to suit your machine that should only take approximately 5 – 7 days.
Hi there, No you do not have to hold the machine at the bottom, but it does mean you gain extra height by having the fixing at the bottom of the machine, and this can prove very helpful when knocking in long posts as you need to have the machine positioned directly above the post and straight and in line to ensure the post is driven in straight and level. You can hold the machine via the top bracket if you wish and also you could hold the machine via the bottom bracket to break concrete if you had just a small amount to break and then you where back to fencing. Please do not hesitate to contact us if you require any future information.
Hi, Yes your breaker will knock in a 6” post as long as the ground is not too hard and dry, if it is it will shatter the post. The 6” post knocking cup and stem id just over 6” in diameter to accommodate a 6” post. Please contact us to get the latest price and availability.
Unfortunately we only manufacture the brackets for our own breakers, but we would be more than happy to discuses supplying you with a new RAW300 Post Knocker and take your old machine in as a part exchange. Please contact us so we can discuss in more detail.
Hi there, yes we can, but we need to know what size diameter cup you require, there are 4”, 5”, 6”, 7” and 8” all the cups are slightly over sized to accommodate the relevant size fencing steak. As you breaker has a 45mm steel we would recommend a cup no bigger than 6” for your machine. Please contact us for the price and delivery time.
Can you send some information regarding the brand and model of the hammer please. Or if you don’t know a picture and the chisel diameter would be great.
Yes we can. We could do with a picture and the tool diameter please as JCB have badged many breakers including Montabert, Rammer and Atlas Copco. The lastest ones are from Korea.
Hi thanks for the info…
There’s an ID plate on the left hand side of the hammer that should give you the model number. If that’s missing then we would need the chisel diameter.
Can you send some information regarding the brand and model of the hammer please. Or if you don’t know a picture and the chisel diameter would be great.
You would have the choice of a RAW 1000 or 3000. We would push you towards the RAW 3000 as the excavator could handle 2900KG no problem.
We very rarely sell used hammers. We generally recondition them so we can sell with piece of mind. Please contact us on 0121 445 6526 to discuss your requirements
Please send some more information and/or pictures. Brand and model would be great but a picture and the chisel diameter would suffice.
